Century 45100 manual Point Models fig. e For Infants or Small Toddlers, For Toddlers

OPERATIONS and ADJUSTMENTS (continued)

7Changing Harness Strap Slots: A Loosen harness straps:

Pull and hold upper belt tab.

Pull harness straps out.

BRemove both harness strap loops from Splitter Plate on back of car seat.

CChange harness strap slots.

Make sure harness straps are threaded through matching slot of seat pad and car seat.

It may be necessary to remove seat pad from top of car seat.

D Re-attach harness strap loops to Splitter Plate:

5-Point Models (fig. e):

•For Infants or Small Toddlers:

Put Top right strap loop on Splitter Plate first, then attach Top left strap loop.

NOTE: Make sure ends of straps are behind Splitter Plate.

•For Toddlers:

Put Bottom right strap loop on Splitter Plate first, then attach Bottom left strap loop.

Overhead Shield Models (fig. f):

Put right strap loop on Splitter Plate first, then attach left strap loop.

NOTE:

•Make sure both strap loops are securely attached within Splitter Plate hook.

•Make sure straps are NOT twisted and are routed behind stand (fig. g).

12