ASSEMBLY
Front Wheel Assembly
1 Hold swivel wheel assembly upright (Tab pointing down).
Tab
2 Tilt stroller slightly back and push wheel assembly onto leg until it locks in place.
Repeat steps 1 and 2 for opposite leg.
Opening Stroller
1Stand stroller upright and rotate lever to release latch.
CAUTION: After wheel assembly is complete, pull on wheels to check that they are locked in place.
Locking Footrest
Push footrest down so that Cross Tube is centered between three (3) Tabs on bottom of footrest, and it snaps in place.
2 Spread handle and rear legs |
|
|
|
until both Fold Locks “click” | Fold Locks |
|
|
into position. | Cross Tube | Tabs |
Rear Wheel Assembly
1 Remove axle protectors from ends of axle and discard.
2 With stroller laying face down on floor, slide brake lever brackets onto rear legs until you hear a click.
NOTE: Brake levers must face rear of stroller.
3
