CAR SEAT/STROLLER USE

7

WARNING
Avoid serious injury from falling or sliding
out:
• Always use car seat harness straps to
restrain child, even when sleeping.
• Always be sure car seat handle is in locked
upright carrying position when lifting or
carrying child.
• Always be sure brakes are locked when
attaching and removing car seat from
stroller frame.
• Always be sure child’s tray is fully inserted
and locked into position before attaching
car seat.
• Always be sure car seat is locked into child’s
tray and straps are attached to car seat
before each use.
DO NOT lift car seat/stroller unit by
car seat handle or car seat shell. Handle
may break.
DO NOT allow child to hang or pull down
on car seat handle as stroller may tip over.

Only a Century Celestia Infant Car Seat

or Avanta Infant Car Seat (manufactured

after January 1, 2001) is designed to

attach to this stroller. If one of these

car seats is not included with this

stroller, one may be purchased

separately at a retail store.

Call Century for updates of compatible car seat models
for this stroller.
ONLY use car seats recommended by Century with
this stroller.
Read and understand car seat instruction manual
before using car seat in a vehicle.
Car Seat/Stroller Use:
Maximum Weight: 22 lbs. (10 kg)
Maximum Height: 29 inches (73.7 cm)

Safety First Checklist

Weight, Height and Activity Limits

1Set rear brakes to prevent
stroller from moving by
pushing down on both
Brake Levers.
2Attach child’s tray:
• Line up child’s tray ends with
slots in fold locks.
• Push child’s tray into slots.
• Pull on child’s tray to be sure
it is securely locked.
3Remove Tongueof child’s
tray pad from child’s tray
Slot:
While pulling out on
Release Handle on
front of child’s
tray, pull up on
child’s tray pad.
4Position stroller seat back
support in recline position:
Push both seat back
Levers inward and
fully lower seat back.

Attaching Car Seat

Slot
Tongue
Release
Handle

Car Seat included with some models.

Brake Lever
Levers