ASSEMBLY and USE continued
Changer
Changer can only be used when bassinet is installed in Playard/Crib.
WARNING
Avoid serious injury or death:
• Always use restraint belt to prevent falls.
• Use with infant who weighs less than 8.2 kg (18 lbs.) and is less than 63.5 cm (25 inches) tall.
• Discontinue use of changer if infant can push up on hands and knees or sit unassisted.
• DO NOT carry changer with infant in it.
1 Lay changer on flat surface.
Triangular T-Fitting
Tab
2 Grasp middle of each long side and gently pull apart until short sides “click” and lock in place.
NOTE: Make sure changer sides are fully extended and locked.
3 With vinyl side facing up, | ||
insert two (2) | ||
| ||
on changer into |
| |
in bassinet and push down |
| |
to secure. |
|
4Push Triangular Tabs
into Triangular Holes | Triangular |
in Playard/Crib corners. | Tab |
| Triangular |
| Hole |
5Secure changer to Playard/Crib:
• Pass Attachment Strap through opening in corner of side panel of Playard/Crib.
• Fasten strap to outside of Playard/Crib.
Repeat for other strap. Attachment
Strap
6Place storage pocket flap over
side of Playard/Crib.
NOTE: DO NOT place supplies weighing more than 2.3 kg (5 lbs.) in storage pocket.
Changer is now ready for use.
6
