C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX
(512)
M360
CAN bus
Controller
M Module
The M360 CAN bus Controller is an integrated standalone controller for the Controller Area Network (CAN) with an M Module interface. CAN is used within the automotive and general industrial environments. The M360 contains all necessary hardware for high performance serial network communications. It performs all the functions of the physical and data link layers.
Specifications:
Serial Port Characteristics:
Data Rates: | Up to 1 Mbps |
Clock Frequency: Programmable
Identifier Fields: Standard (11 bit) and Extended (29 bit) supported
CAN access priority: Determined by message identifier
I/O Buffer Memory:
TX: 64 bytes (2 CAN messages)
RX | 10 bytes |
Connectors: | 9 pin DSUB |
| (Female) |
Temperature: |
|
Operating: | 0°C to 60°C |
Storage: | |
Power: | +5V @ 0.175 A |
Transceiver Characteristics:
Type: | PCA82C250T |
TTL signals: | TX0 |
(on I/O connector) | TX1 |
| RX0 |
| RX1 |
Controller: | SJA1000 |
CANbus support: | Rev. 2.0a |
| Rev. 2.0b |
Front Panel Indicators:
Two LEDs: User Programmable Status
Full Interrupt Capabilities
Isolation:
M Module Compliance
Complies with ANSI/VITA Std 12- 1996 for
Data Transfers | 16 bit |
InterruptsINTA
IDENT Implemented
Compatible with VXI, VME, PCI, PXI, CPCI & Ethernet Carriers
Applications
•Automotive CAN interfacing
•Industrial Control
Ordering Information
Part Number |
Additional Information
User Manuals for C&H carriers and this module can be found on our website at www.chtech.com.
