Install Multi-Function Door Control Panel

Models 1160 and 1150 ONLY

There are 4 screw terminals on the back of the Multi Function Control. Connect bell wire by color; yellow to yellow, white to white, red to red and black to black.

Install the Multi-Function Control on an inside garage wall as shown. Use anchors if installing into drywall a convenient place is alongside the service door.

LOCATE OUT OF THE REACH OF CHILDREN.

Run bell wire up the wall and across the ceiling to opener. Secure with insulated staples.

Receiver terminals and antenna are Located on back panel of opener. Position antenna wire as shown. Then connect the wire by color to the red, white, black and yellow opener terminal screws.

OPERATION OF THE

MULTI-FUNCTION CONTROL PANEL

DOOR CONTROL PUSH BUTTON

Press to open or close door. Press again to REVERSE door during CLOSING cycle or to STOP door while OPENING.

LOCK SWITCH: Activate ONLY when door is closed. The LOCK Switch is designed to prevent operation of door from portable remote control transmitters. Door will OPEN from Door Control Button, Key Switch and Keyless Entry Systems. Door will CLOSE if door control button is pressed and held until the door closes fully. If button is released before down travel is completed, door will reverse.

TO ACTIVATE: Press Lock Switch button. Indicator light will

turn ON. TO TURN OFF: Press Lock Switch button again. Indicator light will turn OFF. Normal operation will

LIGHT SWITCH

TO ACTIVATE: Press Light Switch button. Indicator light will turn ON. Opener light will turn on (or remain on if opener is still in 41/2 minute automatic cycle). TO TURN OFF: Press Light Switch button again. Opener light will turn OFF.

NOTE: To turn light OFF during 4-1/2 minute automatic cycle, press Light Switch button twice • to activate and then to turn off Light Switch Feature. Light will turn OFF immediately.

INSTALL THE LIGHTS

Install a 75 Watt maximum light bulb in each socket. Lights will turn ON and remain lit for 4-1/2 minutes when power is connected. Then they will turn OFF. If bulbs burn out prematurely due to vibration, replace with "Garage Door Opener" bulbs.

INSTALL THE LENSES

Slide lens into guides as shown. Snap bottom tabs into lens slots.

For convenience, lenses may be installed after Adjustment Step 3, Page 22.

WIRING INSTRUCTIONS FOR ACCESSORIES

The Protector Systemä

To white and black opener terminals

Outdoor Key Switch:

To red and white opener terminals

15

Page 14 Page 16
Page 15
Image 15
Chamberlain 1145-1/3HP, 1150-1/3HP, 1160-1/2HP owner manual Models 1160 and 1150 only
Page 14 Page 16

1160-1/2HP, 1145-1/3HP, 1150-1/3HP specifications

The Chamberlain 1150-1/3HP, 1145-1/3HP, and 1160-1/2HP garage door openers represent a pinnacle of performance and reliability in the world of residential garage automation. Each model combines innovative technology with essential features to provide homeowners with the convenience and security they need.

The Chamberlain 1150-1/3HP is designed for standard single and double garage doors. Its powerful 1/3 horsepower motor ensures smooth and efficient operation, making it an ideal choice for everyday use. One standout feature is its ultra-quiet operation, thanks to the built-in soft start and stop system. This technology minimizes noise, making it perfect for homes with living spaces adjacent to the garage. Additionally, the opener comes equipped with MyQ technology, enabling users to monitor and control their garage door from anywhere using a smartphone app.

Moving on to the Chamberlain 1145-1/3HP, this model shares many features with the 1150 but enhances security with its wireless keypad and remote control capabilities. The wireless keypad allows for keyless entry, providing users with the flexibility to open the garage door with a simple code. This feature is particularly useful for families or when handing over access to trusted individuals, such as service personnel.

Finally, the Chamberlain 1160-1/2HP takes performance up a notch with its more powerful motor, capable of handling heavier doors. The 1/2 horsepower motor ensures increased lifting capacity and improved durability, making it suitable for larger or insulated garage doors that may require more force to operate. Like its counterparts, the 1160 is also compatible with MyQ technology, allowing for seamless smartphone integration.

All three models feature a robust design with a steel-reinforced belt drive system that offers strength and reliability. Safety features such as the SecureCode technology ensure that the remote control codes cannot be easily copied, enhancing security for your home. Additionally, they include safety reversing systems that stop and reverse the door if an obstacle is detected, ensuring safe operation for families.

In summary, the Chamberlain 1150-1/3HP, 1145-1/3HP, and 1160-1/2HP garage door openers are distinguished by their blend of power, quiet operation, advanced security features, and smart technology. Ideal for any homeowner seeking convenience and peace of mind, these models stand out as exceptional choices in the realm of garage door automation.
Top Page Image Contents