![](/images/backgrounds/52256/52256-3627x1.png)
Using the |
|
|
|
Door Control |
|
|
|
THE |
|
| |
Press the push button to open or |
|
| Push |
close the door. Press again to |
|
| |
|
| Button | |
reverse the door during the closing |
|
| Lock |
cycle or to stop the door while it's |
|
| |
|
| Button | |
opening. | LOCK | LIGHT | Light |
Light feature |
|
| Button |
|
|
|
Press the Light button to turn the opener light on or off. It will not control the opener lights when the door is in motion. If you turn it on and then activate the opener, the light will remain on for
Lock feature
Designed to prevent operation of the door from
To activate, press and hold the Lock button for 2 seconds. The push bar light will flash as long as the Lock feature is on.
To turn off, press and hold the Lock button again for 2 seconds.The push bar light will stop flashing. The
B)To operate one door using all three buttons on the
You may program the remote to open |
| |
the door with the large button, close |
| |
it with the middle button, and stop the | Open | |
door’s movement with the third | Close | |
Stop | ||
button. | ||
|
NOTE: If remote is already programmed,
you must first erase all codes. See Programming.
1.With the door closed, press and hold the large remote push button.
2.Press and hold the Lock button on the door control.
3.Press and hold the door control push bar.
4.After the opener lights flash, release all buttons.
To Open the Door Manually
WARNING
To prevent possible SERIOUS INJURY or DEATH from a falling garage door:
•If possible, use emergency release handle to disengage trolley ONLY when garage door is CLOSED. Weak or broken springs or unbalanced door could result in an open door falling rapidly and/or unexpectedly.
•NEVER use emergency release handle unless garage doorway is clear of persons and obstructions.
•NEVER use handle to pull door open or closed. If rope knot becomes untied, you could fall.
Lock feature will also turn off whenever the “learn” button on the motor unit panel is activated.
Additional features when used with the 3-Button hand-held remote
A) To control the opener lights:
In addition to operating the door, you
may program the remote to operate the lights.
The door should be fully closed if possible. Pull down on the emergency release handle and lift the door manually. To reconnect the door to the opener, press the door control push bar.
Emergency
Release
Handle
(Pull Down)
Trolley
Release
Arm
NOTICE
1.With the door closed, press and hold a small remote button that you want to control the light.
2.Press and hold the Light button on the
3.While holding the Light button, press and hold the Lock button on the door control.
4.After the opener lights flash, release all buttons.
The lockout feature prevents the trolley from reconnecting automatically. Pull the emergency release handle down and back (toward the opener). The door can then be raised and lowered manually as often as necessary. To disengage the lockout feature, pull the handle straight down. The trolley will reconnect on the next UP or DOWN operation, either manually or by using the door control or remote.
MANUAL DISCONNECT
POSITION
Trolley
Release
Arm
Emergency
Release Handle
(Down and Back)
TICE
NO
LOCKOUT POSITION
27