LIMIT AND FORCE ADJUSTMENTS: |
|
|
Weather conditions may cause |
|
|
some minor changes in door |
|
|
operation requiring some | 9 | 1 |
| kg 7 | 5 3 kg |
• Manually operate door. If it is unbalanced or |
binding, call a trained door systems technician. |
• Check to be sure door opens & closes fully. Adjust |
limits and/or force if necessary. (See pages 23 |
Pages 23 and 24 refer to the limit and force adjustments. Only a screwdriver is required. Follow the instructions carefully.
FORCE CONTROLS
+
and 24.) |
• Repeat the safety reverse test. Make any |
necessary adjustments. (See Adjustment Step 3.) |
•Oil door rollers, bearings and hinges. The opener does not require additional lubrication. Do not grease the door tracks.
Repeat the safety reverse test (Adjustment Step 3, page 25) after any adjustment of limits or force.
THE REMOTE CONTROL BATTERYThe lithium battery should produce power for up to 5 years. To replace battery, use the visor
clip or screwdriver blade to pry open the case as shown. Insert battery positive
side up (+).
Dispose of old battery properly.
+
LIMIT CONTROLS
Battery positive
side up (+)
WARNING
To prevent possible SERIOUS INJURY or DEATH:
•NEVER allow small children near batteries.
•If battery is swallowed, immediately notify doctor.
NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
28