CARE OF YOUR OPENER
LIMIT AND FORCE ADJUSTMENTS:

 

 

 

 

 

 

 

Weather conditions may cause

FORCE CONTROLS

 

 

some minor changes in door

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

operation requiring some re-

9

1

9

1

 

 

adjustments, particularly during

7

3

7

3

 

 

the first year of operation.

 

 

 

5

 

5

 

 

 

 

 

KG

 

KG

 

 

Pages 23 and 24 refer to the limit

 

 

 

 

 

 

 

 

 

 

and force adjustments. Only a

LIMIT CONTROLS

 

 

 

screwdriver is required. Follow

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the instructions carefully.

 

 

 

 

 

 

 

 

 

 

Repeat the safety reverse test (Adjustment Step 3, page 25)after any adjustment of limits or force.
THE REMOTE CONTROL BATTERY

WARNING

To prevent possible SERIOUS INJURY or DEATH:

NEVER allow small children near batteries.

If battery is swallowed, immediately notify doctor.

The lithium battery should produce power for up to 5 years.

WARNING

To reduce risk of fire, explosion or chemical burn:

Replace ONLY with 3V2032 coin batteries.

Do NOT recharge, disassemble, heat above 100°C (212°F) or incinerate.

MAINTENANCE SCHEDULEOnce a Month

Manually operate door. If it is unbalanced or binding, call a trained door systems technician.

Check to be sure door opens and closes fully. Adjust limits and/or force if necessary (see pages 23 and 24).

Repeat the safety reverse test. Make any necessary adjustments (see Adjustment Step 3).

To replace battery, use the visor clip or screwdriver blade to pry open the case as shown. Insert battery positive side up (+).

Dispose of old battery properly.

Replace the battery with only 3V2032 coin cell batteries.

Battery positive side up (+)

Twice a Year

Check chain tension. Disconnect trolley first. Adjust if necessary (see page 7).

Once a Year

Oil door rollers, bearings and hinges. The opener does not require additional lubrication. Do not grease the door tracks.

NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.

Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

28