When Several Remotes Operate One Device

To match the 974-315LM to another CGI manufactured remote’s code (Remote Control X):

Resetting the 4th Push Button Back to Security✚ ® as Follows

1.

Begin by having both the 974-315LM and

 

Remote Control X available.

2.

Press and hold the 1st and 4th push buttons

 

on the 974-315LM until the yellow indicator

 

light, visible on the bottom through a small

 

hole, begins to blink. It will blink for 30

 

seconds; during this time it is in the learn or

 

training mode, and the buttons can be

 

released.

3.

While it is in learn mode, hold Remote

 

Control X, another CGI fixed or billion-code

 

transmitter, back to back with FCC labels

 

touching as illustrated.

4.

Press and hold the Remote Control X

 

push button as you slowly slide the remotes

 

across each other until the 974-315LM

 

indicator light blinks very rapidly, indicating it

 

has learned the code. (If Remote Control X

 

is also a 974-315LM, you must press and

 

hold its 4th push button.)

5.

The 4th button is now sending the same

Yellow

Indicator

Light

FCC Label

Push and hold the 1st and 4th buttons while observing the small yellow indicator light. Hold both buttons for ten seconds until the yellow indicator light stops blinking. The remote has defaulted to one of six randomly preprogrammed Security✚® settings.

Replacement Parts

3V2032 Lithium battery (2 required) . . . . . . . . . . . . . . .10A20

Visor clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29B137

identical coded signal as Remote Control X.

This code will remain inside the 974-315LM

until replaced with another new code by

repeating steps 1-4 above, or by resetting to

Security✚®.

Remote Control X

Yellow

Indicator

Light

 

© 2006, The Chamberlain Group, Inc.

114A2590D

All Rights Reserved