Overview
The Wireless Doorbell and Intercom can determine who is at the door from anywhere in the house. The Doorbell and Intercom have up to a 1000' range and use a 900 Mhz secure digital radio link. The intercom is compatible with various Chamberlain Wireless Products.
Carton Inventory
Rubber Pads
Intercom
Mounting Tape
Alcohol Wipe
Doorbell
® | Model RFDI |
| |
| Wireless Doorbell and Intercom |
| Talk Button: Following the ringing of the Doorbell by |
| a guest, press and hold the Talk |
| button to talk to the guest. Once the |
| link to the Doorbell is made, any |
| other intercoms in the network |
| cannot hear the conversation. |
Volume: Pressing the Volume button repeatedly will cycle through volume levels.
Battery: The AA Alkaline batteries
(not provided) will last up to a year depending on use
(Lithium batteries recommended for colder |
|
environments). When batteries are |
|
low intercom will emit two beeps |
|
every ten minutes. |
|
An AC Adapter (not provided) can |
|
also be used to power the intercom. |
|
In this case, both the power and |
|
channel lights will remain on. | OPTIONAL |
Voice Activation Mode (VOX): Voice Activation Mode (VOX) allows a call to be answered without pressing the Talk button. Once a call is heard on an intercom which has been set to VOX, a response can be given by speaking loudly into the intercom. There will be a slight delay when VOX is first activated by a
voice, but will continue to transmit audio until the speaking stops. To put intercom into VOX,
place Dipswitch #1 to the UP position. | 1 | 2 |
|
|
Operation & Features
Intercom
Volume Button
Talk
(Power - On)
Channel Button |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| AC Adapter |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| Learn Button |
| Dipswitch #1 |
| ||
|
|
|
| Dipswitch #2 |
| |
|
|
|
| |||
|
|
|
|
|
|
|
On/Off: To turn intercom ON, press any button.To turn intercom OFF, hold down the Volume button for 5 seconds.
Doorbell
Call Button: To talk, hold down the Call button and all intercoms in the network will receive the signal. When holding down the Talk button on a different intercom, a secure channel is created and the other intercoms in the network do not hear the conversation. Once a secure link is made, the Call button on the Doorbell does not need to be pressed to speak again.
Battery: The AA Alkaline batteries (not provided) will last up to a year depending on use. (Lithium batteries recommended for colder environments.)
Alternate Chimes: The intercom can be set to ring with two different chime patterns, to identify which intercom is signaling. To change chime pattern, set
Dipswitch #2 to OFF.
Volume: To increase the intercom volume, set Dipswitch #4 to OFF. Sensitivity: To increase sensitivity on the intercom set Dipswitch #3 to OFF.
1
