Assembling the Camera (cont.)
B)TIGHTEN BOTH NUTS TO SECURE ASSEMBLY.
A)ALIGN CAMERA LENS TO HOLE IN OUTSIDE COVER.
BLOW-UP
CONNECT CAMERA WIRING
TO TERMINAL BLOCK AS SHOWN.
Video
Video Ground
+Vdc
Ground
On a typical Camera: Video is Yellow +Vdc is Red
All other colors are ground.
ATTACH PC BOARD TO BRACKET
WITH 2 SCREWS, AS SHOWN.
ADD GASKET
4
5
6
7
Connecting the Camera
Power cable AWG 26 or larger
Monitor
RG-59 or RG-6 coax
A long cable run (150ft or more) can noticeably reduce the picture brightness and increases the possibility of ground loop hum.
Viewing the Camera From All TVs in a House
Antenna or cable
R
VIDEO DISTRIBUTION SYSTEM
DUAL VIDEO MODULATOR / BROADBAND AMPLIFIER / IR REPEATING SYSTEM
Using an All in One Video Distribution System such as a ChannelPlus model 3015, you may view the camera on an unused UHF or cable channel. (For example, the front door camera could be UHF channel 50. All antenna channels will appear normally.)
4 | 5 |
