Sample System Diagram 3:
Transmitting S-video and DTS from a DVD 600 feet with IR
FEATURES
EASY WIRING
Connect a local monitor here
The SVC-10 transmitter and receiver communicate over a single run of CAT-5 wire. A back panel control is on the transmitter to
200 800 Set LENGTH ADJUST to 600
Connect a local receiver here
0 1000
allow compensation for any length of wire up to 1000 feet. Wire RJ-45 connections according to TIA T568A standard.
FLEXIBLE VIDEO INPUT
POWER 15VDC 300mA
350-103 power supply (included)
Attach the IR emitter directly over the IR sensor.
AUDIOOUT | | DIGITALOUT | PCM/AC3/DTS | |
| VIDEOOUT | |
AUDIO IN | | DIGITAL IN | VIDEO IN | |
LEFT | RIGHT | COAX | VIDEO | S |
Digital
audio
s-video
DVD
LENGTH | |
ADJUST | CAT-5 |
(in feet) |
400 | 600 | IR REPEATERS |
200 | 800 | |
0 | 1000 | |
2171
Choose between s-video input or composite video. The SVC-10 has its own connector for each - no need for a converter plug.
UNIVERSAL AUDIO
The SVC-10 accepts either left&right analog audio or digital audio. It can handle either coax or fiber optic (TOSLINK) digital audio. When using the fiber optic cable, the SVC-10 converts this signal and puts it on the coax digital loop out connector. When using analog audio, the SVC-10 will maintain Dolby Pro- logic® encoding if present.
LOOP OUT CONNECTORS
All SVC-10 connectors have built in loop through connectors for a second device such as a local monitor.
ACTIVE TERMINATE FEATURE
600 feet CAT-5
| 350-103 power | | | | | |
| supply (included) | | | | | |
| AUDIO | AUDIO | VIDEO | S- | CAT-5 | IR |
| LEFT | RIGHT |
| | | | |
2132
TV
Digital
Surround Sound
Processor
6
The SVC-10 terminates the inputs into a 75 ohm load. When a second cable is connected to the output, the SVC-10 automatically disconnects this termination to allow the second device to provide the termination.
IR CONTROL
Standard 12 volt ChannelPlus IR targets and emitters can be used with the SVC-10 to allow control of the source from the remote location.
MOUNTING
The SVC-10 can be mounted in standard 19” racks by attaching the included mounting ears. Remove the rubber feet on the bottom of the unit to ensure clearance when inserted into a rack.
3
