The 6127 is a
Features:
High quality 1/3” Sony |
470 TV lines of resolution |
24 piece LED IR illuminator with |
Model 6127
1. | Connect wiring | 3. Adjust camera settings | Camera Adjustments | |
4. Attach dome | ||||
2. | Mount base | |||
| ||||
|
| |||
|
| FL: Flicker Lens ON/OFF |
| |
|
| AGC: Auto Gain Control High/Low |
| |
|
| AES: Auto Electronic Shutter ON/OFF |
| |
|
| BLC: Back Light Compensation ON/OFF |
|
VR Adjustment level for DC Drive Lens (Switch AES OFF before adjusting)
View images 65 feet away in total darkness |
Automatic Gain Control (AGC) and Auto White Balance |
(AWB) |
Easy to install |
Dome Camera
Dome Base & Camera | Dome Cover | Screws |
Zoom
Near
Far Tele Focus
Wide
BNC connector
Coax extension (not included)
Important Note:
No more than one 6127 should be used with Channel Vision’s
Installation:
connectors (not included)
To Monitor or
Video distribution
Power supply (included)
Power Supply | Hex Wrench |
Warnings:
Do not look directly into the illuminator when in use. Do not touch the body of the unit when in use. It can
reach temperatures as high as 150ºF.
Do not point the illuminator directly at paper or flammable materials.
Avoid touching the lens with fingers. Clean off any finger
Using the wrench, loosen the 4 screws securing the dome |
cover to the base. |
Drill a hole in the wall or ceiling for wiring (see diagram). |
If necessary, attach the camera’s video output to a coax |
extension that is long enough to reach your monitor or |
video distribution equipment. |
If necessary, cut the connector off of the end of the power |
supply and splice in an extension using |
connectors. |
Mount the base with the provided screws. |
Move the camera body to adjust the view and make |
electronic adjustments using the dip switches. |
2
prints with cleaning alcohol and cotton swabs.
with the provided wrench. | 3 |
