Channel Vision Model IC503, Installation, Features, Specifications, Frequency range, Drivers

Model IC503

Mounting screws (4)

Installation:

￿Use the provided template to mark and cut a 6½” hole in drywall away from ceiling joists.

￿We recommend wiring with AWG 16 or larger, stranded wire.

￿For proper phasing, both voice coils must be wired alike. Connect red wires to red terminals on speaker and to red or plus terminals on amplifier.

￿Install IC503 in the hole. Tighten the mounting screws. The mounting dog ears will rotate outward and grip the drywall.

￿To control the volume of the speaker locally, use an impedance matching volume control, such as the Channel Vision VC-302.

Features:

Cost Effective

Easy to install

5.25” High performance in-ceiling loudspeaker Mica-filled polypropylene woofer with butyl rubber surround Small perforated designer grille

Recommended power: 50W (peak)

Pre-construction brackets sold separately (model IC52B)

Specifications:

Frequency range:	55Hz - 20kHz ± 3dB
Power Handling:	50 Watts
Drivers:	1- .5” Mylar tweeter
	1- 5.25” polypropylene woofer
Impedance:	8 ohms
Finish:	ABS plastic
Dimensions:	8” OD. 3” Deep
	(Depth from surface of wall board)
	Specifications subject to change without notice.

2 3