Model IC512
Mounting screws (4)
Installation:
Use the included template to mark and cut a 6” hole in drywall away from ceiling joists.
We recommend wiring with AWG 16 or larger, stranded wire.
For proper phasing, both voice coils must be wired alike. Connect red wires to red terminals on speaker and to red or plus terminals on amplifier.
Install IC512 in hole. Tighten the mounting screws. The mounting dog ears will rotate outward and grip the drywall.
Aim tweeter
To control the volume of the speaker locally, use an impedance matching volume control, such as the Channel Vision
Features:
5 ¼” High performance
High power handling capacity
Gold speaker terminals
Proprietary pivoting “Pole Piece” technology with 1” voice coil, neodymium magnet, and silk soft dome
Small perforated designer grille
Recommended power: 20W to 100W (peak)
Specifications:
Frequency range: | 50Hz - 20kHz ± 3dB |
Sensitivity: | 88dB (1W/1m) |
Power Handling: | 100 Watts peak |
Drivers: | 1- 1” Soft dome tweeter |
| 1- 5 ¼” polypropylene woofer |
Impedance: | 8 ohms |
Finish: | ABS plastic |
Dimensions: | 8” OD. 4.21” height |
| (from surface of wall board) |
Weight: | 2.25 Lbs as shipped |
| Specifications subject to change without notice. |
2 | 3 |
