Channel Vision Model IC607, Installation, Features, Specifications, Frequency range, Drivers

Model IC607

Mounting screws (4)

Installation:

￿Use the provided template to mark and cut a 7.7” hole in drywall away from ceiling joists.

￿We recommend wiring with AWG 16 or larger, stranded wire.

￿For proper phasing, both voice coils must be wired alike. Connect red wires to red terminals on speaker and to red or plus terminals on amplifier.

￿Install IC607 in the hole. Tighten the mounting screws. The mounting dog legs will rotate outward and grip the drywall.

￿To control the volume of the speaker locally, use an impedance matching volume control, such as the Channel Vision VC302.

Features:

Cost Effective

Easy to install

6.5” In-ceiling loudspeaker

Mica-filled polypropylene woofer with butyl rubber surround Small perforated designer grille

Recommended power: 70W (peak)

Rough-in bracket kit sold separately Model: IC65RB-2

Specifications:

Frequency range:	50Hz - 20kHz ± 3dB
Power Handling:	70 Watts
Drivers:	1- .5” Mylar tweeter
	1- 6.5” polypropylene woofer
Impedance:	8 ohms
Finish:	ABS plastic
Dimensions:	9” OD. 3.3” Deep
	(Depth from surface of wall board)
	Specifications subject to change without notice.

2 3