Channel Vision IR-5000 warranty Mounting the IR emitter

Mounting the IR emitter Mounting the IR receiver: Option 1 - Using the holster

Mount the IR receiver to the TV or on a surface within line of sight of your remote control.

CD player

Remove the backing from the tape and attach the
IR emitter holster over the IR sensor of the device	Remove the backing from the tape and attach the
you wish to control.	IR receiver holster in the desired location.

Snap IR emitter into the holster	Snap IR receiver head into the holster
	as shown.
as shown.

Mounting the IR receiver: Option 2 - Using the hole mount	Mounting the IR receiver: Option 3 - Using the tabletop mount
	Push the IR receiver head
	through the hole in the
	tabletop mount.
Drill a 3/4” hole.
Push the IR receiver head
through the hole.
Insert the IR receiver head
into the IR receiver hole mount.	Insert the IR receiver head		To secure the mount, remove
	into the IR receiver hole mount.		the backing from the foam tape
		Push the IR receiver hole	on the bottom of the unit and
			attach the mount to any flat surface.
		mount and IR receiver head
		back into the hole in the tabletop
		mount.

Push the IR receiver hole mount and IR receiver head back into the hole.