Char-Broil 10201597-50

16 • 10201597-50

•Insert 1/4-20x1/2” Hex Head Bolt and flat washer through the top smoker body, in the center of the damper holes as shown.(A)

•Insert the damper as shown. (B)

•Place the 1/4” flat washer onto bolt and thread the 1/4-20 nut on to the bolt. Tighten the nut sufficiently to allow the damper to move. (B)

•Damper is shown properly installed in figure C.

•Install the side handles with 1/4-20X3/4” screws and 1/4-20 Keps nuts as shown (D)

•NOTE: If the handle springs are not installed on the handle rod, Install them per inset E.

•Install Drawer Handle using 2 - 1/4-20x 3/4”screws and 2 1/4-20 Keps nuts. Tighten securely.•Place the Water Pan onto the drawer rack as shown.•Slide the Drawer, with Water Pan, into the Smoker body.

Qty: 1

#1/4-20 Nut

Qty: 1

#1/4-20x1/2"

Hex Head Bolt

Qty: 2

#1/4 Flat

Washer

CDamper shown

installed

Insert 1/4-20X1/2” bolt

and flat washer into bolt hole

Insert damper handle through

damper hole as shown

Install Side Handles with 1/4-20X3/4”

bolts and 1/4-20 Keps nuts as shown.

Qty: 4

#1/4-20x3/4”

Combo truss

head screw

Qty: 4

#1/4-20 Keps Nut

Handle Rod

Spring

E

1/4-20X3/4” screws

1/4-20 Keps nuts

D

Qty: 2

#1/4-20x3/4"

Combo truss

head screw

Qty: 2

#1/4-20 Keps Nut

1/4-20x3/4” bolts 1/4-20 Keps nuts

Smoker Drawer Water Pan

Smoker Drawer

Water Pan Frame

CAUTION: THE DAMPER HANDLE

WILL BE HOT WHILE COOKING!

WEAR AN INSULATED OVEN MITT

WHEN MAKING ADJUSTMENTS!