• Slide hook end of (1) wire door stop into slot in end panel 7 of top assembly with hook facing back of the grill.
•Next slide the other end through slot in end panel on bottom assembly. With aid of a helper attach lower end of door stop to Bottom assembly using (1)
from outside and (1) 1/4” flat washer and a reversible lock nut as shown. Repeat process on other end.
• Attach (2) daisy wheel dampers to bottom assembly and (2) daisy wheel 8 Dampers to firebox and lid assembly using
washers and (1) reversible lock nuts as shown. DO NOT FULLY TIGHTEN to allow for damper movement. Attach dampers to the lid in the same manner..
Attach Handle to Clean out door by passing threaded end of the handle rod through the door as shown. Place latch, flat washer, lock washer onto the end of the handle rod and secure with nut.
Lock Washer
Flat Washer
Nut
Latch
Handle
11
