Char-Broil 415.161209 manual Assembly, Cart legs, Lower cart legs, Front panel and Back brace

ASSEMBLY

1

Cart legs, Lower cart legs, Front panel and Back brace.

Insert lower cart legs into cart legs, make sure the holes for tank exclusion wire face inside, and the holes on lower cart legs are aligned to the lower holes on cart legs. Position leg assemblies as shown below. Attach front panel and back brace to legs using eight 1/4’’-20x2’’ carriage bolts and four 1/4’’-20 tee knobs. Do not fully tighten all tee knobs until

step6.

Cart Leg Front Panel

1/4’’-20

Tee Knob

Qty.8

1/4’’-20x2’’

Carriage Bolt

Qty.8

Leg Extender

Back Brace

Align holes

	Holes for tank exclusion wire
	face inside
	Tank support bracket and Wheels
2
	Turn assembly upside-down. Insert axle bolts into wheels.

Facing the back, position tank support bracket between left legs. Insert axle bolt through leg and bracket and secure with hitch pins.

	Wheel
Hitch Pin	Tank support	Wheel
Qty.2	bracket

Axle bolt

Axle Bolt

Qty.2

“Cone” side of wheel against leg.

17