CAUTION

SPIDER ALERT!

SPIDER AND WEBS

INSIDE BURNER TUBE

If you notice that your grill is getting hard to light or that the flame isn’t as strong as it should be, take the time to check and clean the venturi’s.

VALVE

3.

Remove carryover tubes and burners.

4.

Detach electrode from burner.

 

NOTE: Removal/Detachment method will depend on the

 

burner configuration. See different configurations in

 

illustrations below.

5.

Carefully lift each burner up and away from valve openings.

We suggest three ways to clean the burner tubes. Use the one

easiest for you.

 

(A) Bend a stiff wire (a light weight coat hanger works well)

 

into a small hook. Run the hook through each burner

 

tube several times.

 

(B) Use a narrow bottle brush with a flexible handle (do not

 

use a brass wire brush), run the brush through each

 

burner tube several times.

 

(C) Wear eye protection: Use an air hose to force air into

 

the burner tube and out the burner ports. Check each

 

port to make sure air comes out each hole.

6.

Wire brush entire outer surface of burner to remove food

 

residue and dirt.

7.

Clean any blocked ports with a stiff wire such as an open

CONTROL PANEL

SPIDER WEBS

INSIDE VENTURI

paper clip.

8. Check burner for damage, due to normal wear and corrosion

BURNER

some holes may become enlarged. If any large cracks or

holes are found replace burner.

VERY IMPORTANT: Burner tubes must reengage valve

In some areas of the country, spiders or small insects have been known to create “flashback” problems. The spiders spin webs, build nests and lay eggs in the grill’s venturi tube(s) obstructing the flow of gas to the burner. The backed-up gas can ignite in the venturi behind the control panel. This is known as a flashback and it can damage your grill and even cause injury.

openings. See illustrations at right.

9.Attach electrode to burner.

10. Carefully replace burners.

11.Attach burners to brackets on firebox.

12.Reposition carryover tubes and attach to burners. Replace flame tamers and cooking grates.

Correct

burner-to-valve

engagement

To prevent flashbacks and ensure good performance the burner and venturi assembly should be removed from the grill and cleaned before use whenever the grill has been idle for an extended period.

Storing Your Grill

• Clean cooking grates.

• Store in dry location.

• When LP cylinder is connected to grill, store outdoors in a well-

ventilated space and out of reach of children.

• Cover grill if stored outdoors. Choose from a variety of grill

covers offered by manufacturers.

• Store grill indoors ONLY if LP cylinder is turned off and

Remove screws

Firebox

be tu Carryover

Firebox

burner Electrode bracket

disconnected, removed from grill and stored outdoors.

• When removing grill from storage, follow “Cleaning the Burner

Assembly” instructions before starting grill.

Cleaning the Burner Assembly

Follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting grill.

1.Turn gas OFF at control knobs and LP cylinder.

2.Remove cooking grates and flame tamers.

Firebox

tube

Carryover

Firebox burner bracket

Electrode

Pry off electrode with

a flat blade screwdriver

13

Page 12 Page 14
Page 13
Image 13
Char-Broil 463211512 Storing Your Grill, Cleaning the Burner Assembly, Very Important Burner tubes must reengage valve
Page 12 Page 14

463211512 specifications

The Char-Broil 463211512 is a highly acclaimed gas grill designed for barbecue enthusiasts who value both performance and convenience. This model is renowned for its durability, innovative features, and user-friendly design, effectively making it a staple in outdoor cooking.

One of the standout features of the Char-Broil 463211512 is its robust construction. The grill is built with high-quality stainless steel, ensuring longevity and resistance to rust and corrosion. This not only enhances its aesthetic appeal but also contributes to a sturdy structure that can withstand the rigors of outdoor cooking.

This grill is equipped with four main gas burners, which provide a total of 36,000 BTUs of cooking power. The even heat distribution across the cooking surface allows for uniform grilling, making it easier to achieve perfectly cooked meats and vegetables. Additionally, the grill features a side burner that adds another 10,000 BTUs for preparing side dishes or sauces while grilling.

The primary cooking area boasts 475 square inches of space, complemented by a 175 square inch warming rack. This ample cooking surface can easily accommodate multiple burgers, steaks, or vegetables, making it ideal for gatherings and BBQ parties. The warming rack is particularly useful for keeping food warm without direct heat.

Another technological highlight of the Char-Broil 463211512 is the TRU-Infrared cooking system. This innovative technology uses infrared heat to cook food evenly, minimizing flare-ups and ensuring juiciness in meats. The result is a more consistent grilling experience that locks in flavors and moisture.

Additionally, the grill features convenient electronic ignition, allowing for quick and effortless start-ups. The control knobs are easily accessible and provide precise temperature control, enabling users to customize their grilling experience according to their needs.

Cleanup is also simplified with the removable grease tray and porcelain-coated grates, which are designed to be easy to clean and maintain. The grill’s design includes built-in storage compartments and hooks for tools, making it a practical choice for outdoor cooking.

In summary, the Char-Broil 463211512 stands out as a versatile and efficient gas grill. Its durable construction, powerful burners, advanced infrared technology, and user-friendly features make it an excellent choice for anyone looking to elevate their grilling game. Whether you are a novice grill master or a seasoned pro, this grill can help you create delicious meals that will impress family and friends alike.
Top Page Image Contents