5 | Pull out the two knobs from control panel. Insert temperature gauge stem into the bigger hole above knob bezel, shown A. | |
Make sure the gauge is pushed in as far as it will go, then push the gauge downward until it clips into the panel, shown B/C. | ||
| Temperature gauge stem |
Temperature gauge
Control panel Knob bezel
Knob
A
B
Back of the panel
C
6 | Attach right side fascia to right side shelf using two #10x3/8” screws, 5mm lock washers and 5mm flat washers. | |
Only right side shelf shown for assembly, install left side shelf with fascia in the same way. | ||
|
5mm flat washer
5mm lock washer #10x3/8” screw
Right side shelf
Right side fascia
15