Sideburner Assembly
2
Correct Alignment
A
Burner Tube Sideburner
Valve

C

D

#10-24x3/8” Screw
#10 Lock Washer 5mm silicon washer
#10-24x3/8” Screw
#10 Lock Washer
5mm Silicon Washer
Insert the side burner into the cut-out shown C, place the side
burner on support bracket, align and insert these stud into
installation holes of bracket.
Make sure burner tube aligns correctly onto sideburner valve
underneath left shelf shown B.
Secure burner to pan using two #10-24x3/8" screws and 5mm
silicon washer and #10 lock washers shown D.
Attach sideburner igniter wire from igniter module to electrode tip
underneath left shelf shown E.
Ignition Wire
Electrode
#5-40x1/5” Screw
Insert the sideburner valve into the sideburner and secture it to the
bracket using two #5-40x1/5” screws shown A.
B
Incorrect AlignmentCorrect Alignment

E

Burner Tube
Sideburner
Valve
#5-40x1/5” Screw
Sideburner
Sideburner
463250108 • 15