Char-Broil 463722413 Control Panel and Firebox Supports, Valve / Hose / Regulator and Ignitor

7

Control Panel and Firebox Supports

Stand cart upright.

In front, slide control panel between left and right legs, attach control panel with #10-24x2’’ machine screws. Place firebox supports onto screws and tighten with #10-24 flange nuts. Tighten all screws.

In back, attach upper firebox support with #10-24x2’’ machine screws and #10-24 flange nuts.

Chamfer edge

Control Panel

Firebox

Support

#10-24

Flange Nut

Qty.8

#10-24x2”

Machine Screw

Qty.8

8

Valve / Hose / Regulator and Ignitor

Insert main burner valve and hose between left firebox support and side brace, attach valve/hose/regulator assembly to control panel with #10-24x1/2’’ machine screws.

Attach ignitor to control panel using the stamped nut that’s provided. NOTE: if your grill comes with Snap-in ignitor, please see Option.

Snap-in ignitor	Option: Snap the
	ignitor into the
	control panel.

IgnitorValve/Hose/Regulator

Left firebox support

Stamped nut

Side brace

Main burner valve Hose

#10-24x1/2”

Machine Screw

Qty.2

20