EN | Techno Strobe™ 168 QRG |
Product
Description
The Techno Strobe™ 168 is a lightweight LED strobe light with very low power consumption and
Power Out
Power In
DMX In/Out
Fuse Holder
Product Overview
Intensity
Adjustment
DIP Switches | Speed |
| Adjustment |
Back Panel View
AC Power
Power Linking
Fuse Replacement
DIP Switches
This product has an
You can link up to 34 Techno Strobe™ 168 products at 120 VAC and 57 units at 230 VAC.
1.Disconnect the product from power.
2.Wedge the tip of a
3.Pry the safety cap out of the housing.
4.Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same type and rating.
5.
Automatic and standalone modes can be accessed without DMX through the DIP switches located on the back panel. If you are unfamiliar with DIP switches, download the DMX Primer from www.chauvetlighting.com.
3