Chauvet 2100 Control Panel Operation, Menu Map, Configuration DMX, Configuration Standalone

4.OPERATION

Control

Panel

Operation

To access the control panel functions, use the four buttons located underneath the display.

Button	Function
<FUNCTION>	Press to find an operation mode or to back out of the current menu
<UP>	Press to scroll up the list of options or to find a higher value
<DOWN>	Press to scroll down the list of options or to find a lower value
<TIMER>	Turns on Timer Mode
<VOLUME>	Turns on Volume Mode
<MANUAL>	Controls fog output manually

Menu Map	Mode	Programming Steps			Description
	Interval Set		1~200		Adjusts the fog output interval (in seconds)
	Duration Set		1~200		Adjusts the fog output interval (in seconds)
	Timer Out		1~100%		Adjusts the fog output volume of Timer Mode
	Volume Out		1~100%		Adjusts the fog output volume of Volume Mode
	DMX 512 Add		1~512		Sets the DMX address
	Wireless On	On		Off	Turns the wireless function on or off

Configuration (DMX)

Starting Address

Configuration (Standalone)

Timer Mode

Set this product in DMX mode to control with a DMX controller. When connected to DMX, the fogger will operate in an off-on mode at whatever settings were set through the control panel.

1.Connect this product to a suitable power outlet.

2.Turn this product on.

3.Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket of this product.

The Arena™ 2100 Flex uses one DMX channel in its 1-Channel DMX mode, which defines the highest configurable address to 512. If you are unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.

To select the starting address, do the following:

1.Press <FUNCTION> repeatedly until DMX 512 Add shows on the display.

2.Use <UP> or <DOWN> to select the starting address.

Set this product in one of the standalone modes to control without a DMX controller.

1.Connect this product to a suitable power outlet.

2.Turn this product on.

Never connect a product that is operating in any standalone mode, whether Static, Automatic, or Sound to a DMX string connected to a DMX controller. This is because products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.

To enable the Timer mode, do the following:

1.Connect this product to a suitable power outlet.

2.Turn this product on.

3.Press <FUNCTION> repeatedly until Interval Set shows on the display.

4.Use <UP> or <DOWN> to select the time in between haze.

5.Press <FUNCTION> repeatedly until Duration Set shows on the display.

Arena™ 2100 Flex User Manual (Rev. 7) Page 9 of 13