4.OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the display. See the Product Overview to see the button locations on the control panel.
Button | Function | |
<MENU> | Press to find an operation mode or to back out of the current menu | |
option | ||
| ||
<UP> | Press to scroll up the list of options or to find a higher value | |
<DOWN> | Press to scroll down the list of options or to find a lower value | |
<ENTER> | Press to activate a menu option or a selected value |
Menu Map | Mode | Programming Steps | Description | |
| DMX Mode | 512 | d | Sets DMX starting address |
| Sound Active | SND | S | Sets Sound Active mode and sensitivity |
| Mode | |||
|
|
|
| |
| Automatic | AUTO | S | Sets Auto Program and speed |
| Mode | |||
|
|
|
| |
Configuration
(DMX)
DMX
Personalities
and Starting
Address
Set the product in DMX mode to control with a DMX controller.
1.Connect the product to a suitable power outlet.
2.Turn the product on.
3.Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.
The 4BAR™ Flex has a single
The 4BAR™ Flex uses up to 15 DMX channels in its highest DMX mode, which defines the highest configurable address to 498.
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetlighting.com.
To choose your starting address:
1.Press <MENU> repeatedly until 512 shows on the display.
2.Press <ENTER>
3.Use <UP> or <DOWN> to select the starting address.
1.Press <ENTER>.
Page 10 of 17 | 4BAR™ Flex User Manual (Rev. 3) |
