Chauvet 560-LED manual Power, Linking, Connection

	Q-Spot™ 560 LED QRG
AC	This product has an auto-ranging power supply that can work with an input
Power	voltage range of 100~240 VAC, 50/60 Hz.

Fuse 1. Disconnect this product/product from the power outlet. Replacement 2. Wedge the tip of a flat head screwdriver into the slot of the fuse holder

and pry the safety cap out of the housing, which will pull the installed fuse.

3.Remove the blown fuse from the safety cap and replace with a fuse of the exact same type and rating (T 5 A, 250 V).

4.Insert the fuse holder back in place, and reconnect power.

DMX

Linking

The Q-Spot™ 560 LED can work with a DMX controller when linked using a regular DMX serial connection.

If you are not familiar with the DMX standard, please download the DMX Primer document from www.chauvetpro.com.

DMX	The Q-Spot™ 560 LED uses a regular DMX data connection for its DMX
Connection	personalities, Basic and Advanced.
	Download the Q-Spot™ 560 LED User Manual and refer to the Setup
	chapter to learn how to connect this product for DMX operation, and the
	Operation chapter to learn in detail how to configure this product for DMX
	operation.
Master/Slave	The Q-Spot™ 560 LED uses the DMX data connection for its Master/Slave
Connection	mode.
	Download the Q-Spot™ 560 LED User Manual and refer to the Setup
	chapter to learn how to connect this product for Master/Slave operation, and
	the Operation chapter to learn in detail how to configure this product for
	Master/Slave operation.

Page 5 of 16