Mounting
Orientation
The Hurricane™ 700 may be mounted in any position, provided there is adequate room for ventilation around it.
Rigging
Be sure that the structure or surface on which you are mounting this product can support its weight and operating temperature. Please see the “Technical Specifications” section of this manual for weight information. Refer to the following notes on rigging.
∙Make sure to mount the product securely to a rigging point, whether an elevated platform or a truss.
∙When rigging this product onto a truss, you should use a mounting clamp of appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for this purpose.
∙When mounting this product overhead, always use a safety cable.
∙Before deciding on a location for this product, always make sure that it will be easy to access the unit for maintenance and programming purposes.
∙The bracket knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs using your bare hands. Using tools could damage the knobs.
Mounting Diagram
Hanging bracket
Bracket knob
Rubber feet
Hurricane™ 700 User Manual (Rev. 08) | Page 7 of 12 |
