Chauvet 75 manual AC Power, DMX Linking, Replacement, DMX Connection, Master/Slave

LED Followspot 75 QRG

AC Power	This product has a switchable power supply that can work with an input
	voltage of 115 VAC or 230 VAC, 50/60 Hz.
Fuse 1. Disconnect this product from power.
Replacement	2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from
	the housing.
	3. Remove the blown fuse.
	4. Replace with a good fuse of the same type and rating.
	5. Screw the fuse holder cap back in place and reconnect power.
DMX Linking	The LED Followspot 75 can work with a DMX controller when linked using
	a regular DMX serial connection.
	If you are not familiar DMX, download the DMX Primer document from
	www.chauvetlighting.com.
DMX Connection	The LED Followspot 75 uses a regular DMX data connection for its
	3-channel DMX personality.
	Download the LED Followspot 75 user manual and refer to the Setup
	chapter to learn how to connect this fixture for DMX operation, and the
	Operation Instructions chapter to learn in detail how to configure this fixture
	for DMX operation.
Master/Slave	The LED Followspot 75 uses the DMX data connection for its Master/Slave
Connection	mode.

Download the LED Followspot 75 user manual and refer to the Setup chapter to learn how to connect this fixture for Master/Slave operation, and the Operation chapter to learn in detail how to configure this fixture for Master/Slave operation.

Page 4 of 8