Master/Slave Mode (Sound-Active, Auto Mode, Static Colors)
This mode allows a single unit to run a standalone program, while 1 or more other units follow the same operation. This requires the fixtures to be linked with DMX cables. Please see the section on Fixture Linking.
1)Turn switch to the Slave position on the slave units, and they will react the same as the Master.
Mode | DIP switches |
Slave | 1~11 = Off |
Strobe Speed
This fixture has a strobe speed adjustment which will decrease the maximum speed. Please see the setting below for lowering the strobe rate for compatibility mode.
Mode | DIP switches |
Standard mode |
|
6 Hz~18 Hz: | 12 = On |
Decreased Speed |
|
2 Hz~6 Hz: | 12 = Off |
4. Operating Instructions | 9 | 1/4/2010 11:37 AM |
