Mounting Bracket | At the Rear: | |
| ||
| Screw Cap | |
Bubble Wands | Fuseholder | |
Fan Blower | ||
| ||
| Mode Selector | |
Fluid Tank Access | Switch | |
| Controller Socket |
Introduction
Congratulations on the purchase of your new CHAUVET Bubble Machine. We are confident you will enjoy many trouble free hours with this unit. To assist with the care and use of the product we have prepared this short guide.
Operation
This bubble machine has been designed to function on a mains power supply of either
120 VAC, 60 Hz or 230 VAC, 50 Hz and has been fitted with a suitable power plug for use with your local voltage. Check the label on the unit and the power plug for the correct voltage.
Place the machine on a level surface and loosen the thumbscrew on the front of the unitfor fluid tank access, see diagram (fig.1). This will allow the whole of the top cover to be lifted revealing the fluid tank in the base. Fill the tank with quality bubble fluid only. We recommend use of CHAUVET bubble fluid (BJU) as it has been specially formulated for use with CHAUVET bubble machines and produces the best results. Replace the cover and tighten screws. Plug into the mains power and stand back in amazement as you fill the area with hundreds of bubbles!
After use, ensure that all bubble fluid is drained before moving.
Installation / Mounting
The bubble machine must be used in a horizontal position sitting on a level surface or it may be mounted using the bracket provided ensuring that the bubbles are not shooting directly at anyone’s face or above areas of heavy traffic as bubble fluid leaves a slippery surface. Whatever method of installation you choose, the bubble machine must not have more than a 5 degree angle of inclination. We always suggest that for safety purposes use of a suitable hanging clamp and safety cable is essential. CHAUVET offers a range of items, which are ideal for safe mounting.
Mode of Operation
The
Optional Controllers:
Timer Remote
Wireless Remote
Please see the appropriate user manual included with each controller for the instructions on use.
Cleaning
Cleaning your bubble machine regularly will help reduce costly parts replacement and repair charges.
After every 40 hours of continuous operation or when the machine will be idle for a long time it is recommended to rinse the bubble wands and fluid tank with warm water, to prevent a
1.While the unit is unplugged, loosen the thumbscrew and lift cover to reveal fluid tank.
2.Empty all bubble fluid from the tank and replace with warm water. Plug the unit in and allow it to run as usual until all wands appear to be free of residue.
3.Cleaning is now complete. Unplug the unit from power and refill with bubble fluid.
The body of the unit may be cleaned with a soft damp cloth. Store dry.
Maintenance & Servicing
Do not allow bubble fluid to become contaminated. Always replace cap after use.
Work on internal parts should be carried out by a qualified technician. Removal of any covers is considered a breach of warranty and will not be covered under any such agreement unless authorized first by CHAUVET.
Troubleshooting
If you experience low output, or no output at all, unplug immediately. Check fluid level, the external fuse, and main power supply. If all appear to be OK, plug the unit in again. If you are unable to determine the cause of the problem, do not simply continue to use as this may damage the unit. Contact CHAUVET for servicing.
Caution
•Do not obstruct the bubble wands. Never allow children to place fingers inside the front of the machine. Do not leave machine unattended.
•Danger of Slipping. Bubble fluid produces a slippery residue. Do not leave machine unattended.
•Always disconnect from main power supply before cleaning or servicing.
•Never use any other type of liquid other than recommended fluid. CHAUVET provides suitable fluids for use with this machine (BJU).
•Never drink bubble fluid. If it’s ingested, call a doctor immediately. If bubble fluid comes into contact with eyes, rinse thoroughly with water.
•Beware of overfilling or spillage. Always mount on a flat, level surface.
•There are no user serviceable parts inside. Please contact CHAUVET for service.
