B-50 Lil’ Bubbler™ QRG
About This
Guide
Disclaimer
The Lil’ Bubbler Quick Reference Guide (QRG) only contains the product’s connection, mounting, and operation information.
•This Quick Reference Guide DOES NOT replace the product’s User Manual, which you can download from the CHAUVET® website: www.chauvetlighting.com.
•Read ALL the disclaimers and safety notes in this document as well as those in the product’s User Manual before installing, operating, or maintaining this product.
Safety Notes | These Safety Notes include important safety information about installation, |
usage, and maintenance. |
• Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Always disconnect from the power source before cleaning this product.
•Never disconnect this product from power cord by pulling or tugging on the cord.
•If mounting this product overhead, always secure it to a fastening device using a safety cable.
•Do not mount this product on a flammable surface.
•Do not drink the bubble fluid. If you do, call your local emergency service (911) for help.
•Do not add perfume, alcohol, gasoline, or other flammables to the fluid.
•Do not obstruct the bubble wands or allow children to play with the machine or any moving part.
•Make sure the voltage of the outlet to which you are connecting is within the range stated on the decal or rear panel of the product.
•This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product to rain or moisture.
•Always install this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
•Do not obstruct the bubble wands or leave machine unattended.
•Never carry this product from the power cord.
•Do not overfill; spillage may occur. Always mount on a flat, level surface.
•Do not leave unused fluid in the reservoir for an extended period. The fluid may thicken in the reservoir.
•In the event of a serious operating problem, stop using the unit immediately.
•Never try to repair this product. Repairs performed by unauthorized technicians can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.
Page 2 of 4
