Chauvet C-640FC manual AC Power, Power Linking, AC Plug, Replacing, Fuse

EN			Ovation™ C-640FC QRG
AC Power	This product has an auto-ranging power supply that can work with an input
	voltage range of 100-240 VAC, 50/60 Hz.
Power Linking	You can link up	to 9 Ovation™	C-640FC products	at 120 VAC or
	18 at 230 VAC. Never exceed this number. Power linking cords can be
	purchased separately.
AC Plug
	Connection	Wire (U.S.)	Wire (Europe)	Screw Color
	AC Live	Black	Brown	Yellow/Brass
	AC Neutral	White	Blue	Silver
	AC Ground	Green/Yellow	Green/Yellow	Green
Replacing the	1. Disconnect this product from power.
Fuse	2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
	from the housing.

3.Remove blown fuse and replace with a good fuse of the same type and rating.

4.Screw the fuse holder cap back in place and reconnect power.

DMX Linking The Ovation™ C-640FC will work with a DMX controller using a regular DMX serial connection. A DMX Primer is available from www.chauvetpro.com.

DMX Connection The Ovation™ C-640FC uses a regular DMX data connection for its DMX personalities: TOUR, TR16, ARC.1, AR1.D, ARC.2, ARC.3, AR3.D, AR3.S, PIX1, PIX3, PX16,and HSV. See the User Manual to connect and configure for DMX operation.

Note: For optimum control of the 16-bit dimming channels in the TR16 personality, be sure that the dimming curve in SET > DIMX is set to OFF.

Master/Slave The Ovation™ C-640FC uses the DMX data connection for its Master/Slave Connection mode. See the User Manual to connect and configure for Master/Slave

operation.

3