At the Rear:

 

 

 

 

üMounting Bracket

 

üScrew Cap Fuseholder

 

 

 

 

 

* Switch for Color

 

 

 

 

 

 

 

Wheel

 

 

 

 

üLamp Replacement

 

 

 

 

* Voltage selector

 

 

 

 

Cover

 

 

* Speed Control for

 

 

 

 

 

 

 

* Water Effect

 

 

 

 

 

 

 

 

 

 

 

 

üLenses

Fig 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Introduction

Congratulations on the purchase of your new CHAUVET lighting effect. We are confident you will enjoy many trouble free hours with this unit .To assist with the care and use of the product we have prepared this short guide.

Operation

Before connecting this unit to the mains power supply for the first time you must first install the lamps. (See Replacing Lamps for details).

This lighting effect has been designed to function on a mains power supply of either 120V~60Hz or 230V~50Hz and has been fitted with a suitable power plug for use with your local voltage Check the label and voltage selector switch (if fitted) on the unit and the power plug for the correct voltage.

When connected to the main power supply the unit should illuminate. The fan and color wheel will also begin to run.

This unit has two options on the back. By default, the Abyss II comes shipped with the option selected that will constantly have the color wheel rotating. Changing the position of the switch will cause the unit to stay on one color. When the switch is changed back, the color wheel will continue rotating again. There is also a variable speed control knob to adjust the rate at which the water effect flows.

Due to the high operating temperature of halogen lamps, it is advisable that the effect be used in well- ventilated areas taking care not to obstruct the fan or air vents. After use, allow time to cool for safety and to ensure lamp life before moving or touching.

The duty cycle for this effect should be no more than 15 minutes on then 15 minutes off.

Installation / Mounting

Although this unit can be used in an upright position, it is recommended that, for safety purposes, your lighting effect should be properly mounted using a suitable hanging clamp and safety cable. CHAUVET offers a range of items, which are ideal for safe mounting.

Use in a well-ventilated area without obstruction to air vents.

Replacing Lamps

In order to replace the lamp, disconnect from main power supply first, and unscrew the lamp replacement cover, which is highlighted on the diagram (fig.1). Only use the appropriately rated lam as use of any other lamp type may cause the unit to be non-operational.

Due to the nature of halogen lamps it is vitally important that you do not touch the new replacemen lamp with your fingers, as this will reduce lamp life considerably. Once again a tissue or cloth can b used for fitting the replacement lamp.

Finally before using, check that the lamp is housed correctly in the lamp holder and that the lamp replacement cover has been screwed back into place.

If after replacement of the lamp, the unit is still not working then please contact CHAUVET for servicing.

Replacing Fuses

If the unit does not function at all when connected to the main power supply i.e. the mechanism do not spin. Then it is highly likely that the fuse has blown.

Disconnect from main power supply before attempting to replace either lamps or fuse

In order to replace the fuse, disconnect from the main power supply first, and unscrew the fuse hol cover to reveal the fuse. The unit has a label attached which indicates the correct fuse rating and y will also find this listed as part of the specifications for the unit later in this guide. It is most importan that replacement fuses are of the correct rating. Failure to use the correct fuse could damage the lighting effect beyond economic repair.

The fuse should simply be placed inside the holder and the screw cap replaced. When this is done connect to the main power supply to check. If the unit is still not working, then please contact CHAUVET for servicing.

Cleaning

The most important part your lighting effect to keep clean is the lens as it allows the light output to transmit. This should be cleaned with a soft damp cloth. The body of the unit may also be cleaned i the same way. We recommend internal cleaning be carried out by a fully qualified technician.

Maintenance & Servicing

A qualified technician should carry out work on internal parts. Removal of covers other than the fron to replace lamp or effect dish, or the fuse holder is considered a breach of warranty and will not be covered under any such agreement unless authorized first by CHAUVET.

1.Disconnect from main power supply before attempting to replace either lamps or fuse.

2.Ensure that the unit is sufficiently cool, before removing blown lamps.

3.Never touch new lamps with your fingers: use a tissue or a cloth.

Page 1 Page 2
Page 2
Image 2
Chauvet CH-444A user service Introduction, Operation, Installation / Mounting, Replacing Lamps, Replacing Fuses, Cleaning
Page 1 Page 2

CH-444A specifications

The Chauvet CH-444A is a versatile and powerful LED wash light designed for a variety of applications, from live performances to event productions. With its compact design and advanced features, the CH-444A has quickly become a favored choice among lighting professionals and enthusiasts alike.

One of the standout features of the CH-444A is its impressive array of quad-colored LEDs. Each unit is equipped with 12 high-performance 4-in-1 LEDs, which combine red, green, blue, and amber colors to produce a broad spectrum of vibrant hues. This innovative approach allows for smoother color transitions and a richer color palette, elevating the visual quality of any production. The ability to mix colors seamlessly gives users greater creative flexibility, whether for stage lighting, architectural designs, or ambient lighting setups.

In terms of control options, the CH-444A offers multiple operating modes, including DMX control, sound activation, and master/slave functionality. This versatility enables the fixture to adapt to any performance setup, whether operated manually, programmed via a DMX console, or synchronized with other units. An intuitive digital display simplifies the setup process and provides real-time feedback for users.

The rugged and durable construction of the CH-444A ensures that it can withstand the rigors of touring and frequent transport. Its lightweight design makes it easy to mount and adjust, while the built-in power linking feature allows for simplified power management when using multiple units. This design choice not only enhances portability but also makes setup and teardown significantly quicker.

Another notable characteristic of the CH-444A is its energy-efficient performance. The use of LED technology not only reduces power consumption but also minimizes heat output, promoting longer operating life and lower electricity costs. Additionally, with a quiet fanless design, the fixture operates silently, making it suitable for a wide range of environments where noise levels must be kept to a minimum.

In conclusion, the Chauvet CH-444A LED wash light combines advanced technology, versatile control options, and durable construction to deliver an outstanding lighting solution for a variety of applications. Its rich color mixing capabilities, energy efficiency, and user-friendly design make it an indispensable tool for lighting designers and technicians looking to create stunning visual experiences. Whether in concert venues, theaters, or events, the CH-444A promises to enhance the atmosphere and engage audiences with its exceptional performance.
Top Page Image Contents