Wireless Remote Controller (FC-W)

This optional controller will allow you to control the fogger. This consists of the transmitter and the receiver. You may control up to 4 fog machines independently or many more if you run them simultaneously. See the instructions below to set up your fogger to operate with the FC-W.

1.Plug the wireless receiver into the 5-pin port labeled “Wireless Controller” on the fog machine.

2.There are 4 buttons on the wireless remote transmitter which act as triggers. Each button can be assigned to a different fog machine. You may only choose 1 dipswitch on each receiver. See the configuration below for setting the receivers to operate with the transmitter remote.

Mode

Dipswitches

 

CH1

1

= On, 2-4 = Off

CH2

2

= On, 1,3,4

= Off

CH3

3

= On, 1,2,4

= Off

CH4

4

= On, 1,2,3

= Off

3.Press the fog button, and the fog machine will output fog for as long as you hold down the button.

Note: The duration of continuous fog output is based on the capability of the fog machine.

LED indicator (ready)

Dipswitches

Wireless

Transmitter

Fog

Triggers

LED indicator (heating)

Wireless

Receiver

5200 N.W. 108th Ave., Sunrise, FL 33351 U.S.A. (800) 762-1084 – (954) 577-4455 FAX (954) 929-5560 www.chauvetlighting.com

Page 1
Image 1
Chauvet manual Wireless Remote Controller FC-W, Mode