Configuration (Standalone)
Automatic
Mode
Sound Active Mode
LED Color
Mixing
LED Color
Fading
Set the product in one of the standalone modes to control without a DMX controller.
1.Connect the product to a suitable power outlet.
2.Turn the product on.
Never connect a product that is operating in any standalone mode (either Static, Automatic, or Sound) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.
To enable the Automatic modes, do the following:
1.Press <MENU> repeatedly until AuF, AuS, Sou, or rdn shows on the display.
2.Press <UP> or <DOWN> to choose AuF (for a fast show), AuS (for a slow show) or rdn (for a random show).
3.Press <ENTER>.
To enable the Sound Active mode, do the following:
1.Press <MENU> repeatedly until AuF, AuS, Sou, or rdn shows on the display.
2.Press <UP> or <DOWN> to choose Sou.
3.Press <ENTER>.
4.Turn the music on and adjust the microphone sensitivity knob until the product starts responding to the beat of the music.
To adjust the sound sensitivity of the Sound Active mode, do the following:
1.Press <MENU> repeatedly until S 0 shows on the display.
2.Press <UP> or <DOWN> to choose between no sound activation and high sound activation (S
3.Press <ENTER>.
You are able to manually mix the colors and strobe rate of the LED portion of the product. To do so, follow the steps below:
1.Press <MENU> repeatedly until LEd, rGb, or FdE shows on the display.
2.Press <UP> or <DOWN> to choose rGb.
3.Press <ENTER>.
4.Press <UP> or <DOWN> to adjust between full off and on for red (r
5.Press <ENTER>.
6.Press <UP> or <DOWN> to adjust between full off and on for green (G
7.Press <ENTER>.
8.Press <UP> or <DOWN> to adjust between full off and on for blue (b
9.Press <ENTER>.
10.Press <UP> or <DOWN> to adjust the strobe rate
11.Press <ENTER>.
You are able to manually adjust the fade speed of the LED portion of the product. To do so, follow the steps below:
1.Press <MENU> repeatedly until LEd, rGb, or FdE shows on the display.
2.Press <UP> or <DOWN> to choose FdE.
3.Press <ENTER>.
4.Press <UP> or <DOWN> to adjust the fade speed between slow and fast (SP0- SP9).
5.Press <ENTER>.
Eclipse™ RGB User Manual | 15 | 12/20/2011 |
