Chauvet LED-FS1 user manual Operation, Foot Controller Functions, Speed 2 Button Functions Table

4.OPERATION

Foot

Controller

Functions

The COLORstrip™ Foot Controller provides quick access to the COLORstrip’s built-in programs, blackout function, static colors, strobe speed, and chase programs. Please refer to the Product Overview to see the button locations on the Foot Controller.

Button	Function
	This button allows the user to cycle through the stand-alone programs
	in the COLORstrip™ product. You can click the button once for each of
<1>	the programs to cycle through slowly, or hold down the button to cycle
	through the programs faster. For a detailed description of the programs
Scene
	built into the unit, download the COLORstrip™ or COLORstrip™ Mini
	User Manual. To stop the auto programs from running once Scene <1>
	has been pressed, use the Blackout <4> function.
	This button allows users to select the run speed (mode P.) and/or flash
	speed (mode F.) of the selected program. If both speeds are available
	in a given mode, both will change at the same rate unless the product
<2>	is set to custom starting values (see the COLORstrip™ User Manual
	for program details). The Speed <2> button may be clicked once to
Speed
	slowly cycle through individual speeds, or held down to increase
	speed. The speed can be adjusted from 000~100, with two separate
	corresponding values, which are dependent upon the program being
	accessed (see table below).
<3>	This button allows users to quickly place the COLORstrip™ unit into
	Sound-Active mode. To exit the sound function, use the Scene <1>
Function	button to select the program you wish to activate, or Blackout the
	product.
<4>	This button disables all output from the unit. If the button is clicked with
	the unit already in Blackout <4> mode, it will immediately resume the
Blackout
	last running program.

Speed <2> Button Functions Table

Program	Value	Speed <2> Functions
A001~A007	000~099	Run speed increases as flash speed increases
	100	Flash with sound, Blackout without sound
	000~050	Slow to fast
A008~A011		Activates sound-active mode within these
	051~100	programs; defaults to auto speed when no sound
		is present.
	000~050	Slow to fast
A012~A020		Activates sound-active mode within these
	051~100	programs; defaults to auto speed when no sound
		is present.
A021	000~100	RGB color mixing, 000~100 for each
A022	000~100	Color fade, slow to faster

COLORstrip™ Footswitch User Manual Rev. 3 Page 7 of 10