Menu Map
MAIN FUNCTION | SELECTION |
| INSTRUCTION | ||
|
| 7 Color Switching |
|
|
|
|
|
|
|
|
|
|
| 7 Color fading |
| - | Select between 2 switching and 2 fading |
|
|
|
| ||
|
| 3 Color Switching |
| ||
|
|
|
| ||
|
|
|
|
| |
|
|
|
|
|
|
|
| 3 Color Fading |
|
|
|
|
|
|
|
|
|
|
| 7 Color sound active |
| Use the Audio Adjustment |
|
|
|
|
| Knob located on the back | Select between 2 sound active programs |
|
| 3 Color sound active |
| ||
|
|
| of the fixture |
| |
| ~ | - |
| - | Select |
|
|
|
|
|
|
| ~ | - |
| - | Select |
|
| run speed, strobe, automatic/sound, dimmer | |||
|
|
|
|
| |
|
| Red |
|
|
|
|
|
|
|
|
|
|
| Green |
|
|
|
|
|
|
|
|
|
|
| Blue |
|
| Select between 7 static colors. The display |
|
|
|
|
| |
|
| Cyan |
| - | will read ~ . The colors that each of |
|
|
|
|
| these represent are indicated to the left. |
|
| Magenta |
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
| Yellow |
|
|
|
|
|
|
|
|
|
|
| White |
|
|
|
|
|
|
|
|
|
| ~ | (default range is | ) | - | This is the speed range for the 4 switching |
| and fading | ||||
|
|
|
|
| |
|
| Red |
|
|
|
|
|
|
|
| Combine red, green, and blue to create a |
|
| Green |
| ~ | |
|
|
| custom, static, color | ||
|
|
|
|
| |
|
| Blue |
|
|
|
|
|
|
|
|
|
DMX Operation
This is the operating mode which will allow for control with an external DMX controller. You must set the starting address for this mode. If this is your first time using DMX, then it is recommended that you refer to the “DMX Primer” section in the “Appendix” of this manual.
1. Press <MENU> until | or | appears on the LED screen. |
2.Press <ENTER>.
3. Using <UP> and <DOWN>, select the desired DMX address ( | ~ | ). |
Master/Slave
This is the operating mode which will allow 1 fixture to act as the “master” and control all of the other “slave” fixtures. You must set both the master and the slave(s) fixtures to the correct mode for this operation.
Master Settings:
1.Connect the fixtures with DMX cables, as shown in the “Fixture Linking” section.
2.Use any one of the standalone modes for the master unit. This includes: 
, 
, and 
Slave Settings: |
|
|
1. Press <MENU> until | or | appears on the LED screen. |
2.Press <ENTER>.
3. Using <UP> and <DOWN>, set the DMX address to | . |
It is not necessary to set the master fixture as the first fixture in the daisy chain. It may be any fixture in the daisy chain. For example: fixture 2, 5, 10 or 12, etc.
Only 1 fixture may be set to master.
Do not connect a DMX controller to the daisy chain for this operating mode.
4. Operating Instructions | 13 | 9/22/2009 11:10 AM |
