Important Safety Information

Before You Begin

This product is designed for professional use. It is not intended for use in a household environment. This product presents risks of lethal or severe injury due to fire and heat, electric shock, ultraviolet radiation, lamp explosion, and injury from falls. Read this manual before installing or powering the fixture, follow the safety precautions listed below and observe all warnings in this manual and on the fixture. If you have any questions about how to operate the fixture safely, please contact CHAUVET.

Protection against Electric Shock

•Always disconnect from AC power source before servicing or replacing lamp or fuse and be sure to replace with same lamp source.

•All Class I fixtures must be connected to circuits with a suitable Earth Ground.

•To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable materials close to the unit while operating.

•Do not operate the fixture if covers are open or if any internal component is missing or damaged: an unshielded discharge lamp emits dangerous UV radiation that can cause burns and eye damage.

•Make sure power cord is never crimped or damaged.

•Never disconnect power cord by pulling or tugging on the cord.

Protection against Fire & Burns

•This product is designed to be used with very specific lamp(s). Use of any other type of lamp not stated in this manual may create a fire hazard due to possible risk of lamp explosion. Using the wrong type of lamp in this product VOIDS the warranty.

•Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture.

•The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked.

•Maintain a minimum distance of 1 meter (3.28 feet) from combustible materials.

•Allow this product to cool for a minimum of 15 minutes before opening, handling or removing the lamp in this product.

•Maximum ambient temperature is Ta: 40°. Do not operate fixture at temperatures higher than this.

Protection against exposure to (UV) Ultraviolet Radiation

•Avoid direct eye exposure to lamp while it is on.

•Do not operate the fixture if covers are open or if any internal component is missing or damaged.

Protection against Injury to persons

	•	Secure fixture to fastening device using a safety chain.
	•	A hot lamp is an explosion hazard. Do not open fixture for a minimum of 15 minutes after
		switching off. Wear eye and hand protection when re-lamping.
	•	Fixture surface may reach temperatures of up to 160° C (320° F). Handle fixture after it cools.
	•	In the event of serious operating problem, stop using the unit immediately. Never try to repair the
		unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
		Please contact the nearest authorized technical assistance center. Always use the same type
		spare parts.
Caution!	There are no user serviceable parts inside the unit. Do not open the housing or
	attempt any repairs yourself. In the unlikely event your unit may require service,
	please contact CHAUVET.

ST-4000RGB User Manual

2008-11-07/11:37

ST-4000RGB specifications

The Chauvet ST-4000RGB is an exceptional lighting fixture designed for those seeking versatility and performance in their lighting setups. This powerful compact LED spotlight is particularly suited for DJs, event planners, and venues looking to enhance their ambiance and create captivating light shows. One of its standout features is the RGB color mixing capability, which allows users to produce a vast array of colors to match any mood or theme. With a 400-watt LED source, the ST-4000RGB can generate bright and vibrant colors, ensuring that it adequately illuminates any space.

In terms of design, the ST-4000RGB boasts an innovative approach to heat management, enabling prolonged use without the risk of overheating. Its cooling system is optimized to maintain low operational temperatures, ensuring the longevity of the LED components while delivering consistent performance. This aspect is particularly beneficial for events where continuous operation is required over extended periods.

Another notable feature of the Chauvet ST-4000RGB is its advanced control options. The fixture supports DMX 512 control, allowing users to integrate it into larger lighting systems seamlessly. This flexibility empowers users to synchronize multiple units, creating intricate light displays that are both harmonious and visually striking. Additionally, the fixture includes preset color options and chase effects, making it easy for operators to create engaging light sequences without extensive programming.

The ST-4000RGB is designed with user-friendliness in mind. It features an intuitive interface that simplifies navigation through settings and adjustments. Setup is further facilitated by the unit's lightweight design, making it easy to transport and install in various locations. The fixture also includes a robust mounting bracket, allowing for multiple installation options in any environment.

In summary, the Chauvet ST-4000RGB stands out due to its rich color mixing, effective heat management, versatile control options, and user-friendly design. This lighting fixture is a smart investment for anyone looking to elevate the visual experience at their events, making it a popular choice among professionals in the entertainment industry. Whether for a small gathering or a large-scale event, the ST-4000RGB adapts effortlessly, delivering brilliant light and enhancing the overall atmosphere.

Chauvet ST-4000RGB user manual Important Safety Information, Protection against Electric Shock

Models: ST-4000RGB