APPENDIX

DMX Primer

There are 512 channels in a DMX-512 connection. Channels may be assigned in any manner. A fixture capable of receiving DMX 512 will require one or a number of sequential channels. The user must assign a starting address on the fixture that indicates the first channel reserved in the controller. There are many different types of DMX controllable fixtures and they all may vary in the total number of channels required. Choosing a start address should be planned in advance. Channels should never overlap. If they do, this will result in erratic operation of the fixtures whose starting address is set incorrectly. You can however, control multiple fixtures of the same type using the same starting address as long as the intended result is that of unison movement or operation. In other words, the fixtures will be slaved together and all respond exactly the same.

DMX fixtures are designed to receive data through a serial Daisy Chain. A Daisy Chain connection is where the DATA OUT of one fixture connects to the DATA IN of the next fixture. The order in which the fixtures are connected is not important and has no effect on how a controller communicates to each fixture. Use an order that provides for the easiest and most direct cabling. Connect fixtures using shielded two conductor twisted pair cable with three pin XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+).

FIXTURE LINKING

Figure 1 - DMX connector configuration

COMMON

INPUT

1

DMX +

3

 

 

2

DMX -

 

 

1

Resistance 120

ohm 1/4w between

3

pin 2

(DMX -) and

2

pin 3

(DMX +) of

the last fixture.

1

3

OUTPUT

2

Termination reduces signal errors and to

 

avoid signal transmission problems and

 

interference, it is always advisable to connect

 

a DMX signal terminator.

Note!

If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin

 

adapter.

 

The chart below details a proper cable conversion:

3PIN TO 5 PIN CONVERSION CHART

CONDUCTOR

3 Pin Female (output)

5 Pin Male (Input)

 

 

 

GROUND/SHIELD

Pin 1

Pin 1

 

 

 

DATA ( - )SIGNAL

Pin 2

Pin 2

 

 

 

DATA ( + ) SIGNAL

Pin 3

Pin 3

 

 

 

NOT USED

 

Pin 4

 

 

 

NOT USED

 

Pin 5

 

 

 

TFX-FS360 User Manual

9

2010-07-20/14:53

Page 8 Page 10
Page 9
Image 9
Chauvet TFX-FS360 user manual Appendix, DMX Primer, Fixture Linking
Page 8 Page 10

TFX-FS360 specifications

The Chauvet TFX-FS360 is a versatile two-in-one effect light specifically designed for mobile DJs, nightclubs, and live events. This powerful fixture combines the convenience of a wash light with the engaging dynamics of an effective effect light, making it an essential tool for enhancing any performance or event atmosphere.

One of the standout features of the TFX-FS360 is its dual functionality. It is equipped with a powerful wash LED that produces a wide and even color projection, ensuring that venues are lit brightly and vibrantly. The wash feature can be used to create immersive backgrounds or highlight specific areas within a space, providing flexibility in design and execution.

In addition to its wash capabilities, the TFX-FS360 incorporates a brilliant rotating gobo effect. With a variety of patterns and colors, this gobo projection can create compelling visuals on walls, floors, and ceilings, captivating audiences and setting the mood for any occasion. This combination of wash and gobo effects gives users the ability to create dynamic light shows that engage and energize party-goers.

The fixture boasts advanced LED technology, ensuring it delivers consistent color mixing and high brightness, all while being energy-efficient. The long lifespan of the LEDs reduces maintenance needs, making the TFX-FS360 a cost-effective solution for lighting. With a total output of 60 watts, users can expect powerful illumination without sacrificing energy efficiency.

User-friendly controls allow for easy operation of the TFX-FS360. It includes options for DMX control, enabling compatibility with sophisticated lighting designs. Alternatively, the fixture can operate in standalone mode or be set to sound activation, seamlessly synchronizing with the beat of any music. Additionally, multiple preset functions and automated programs offer flexibility for users of all experience levels.

The lightweight and durable design of the TFX-FS360 makes it easy to transport, set up, and break down, crucial factors for those on the road. With the added benefit of multiple mounting options, this fixture can be easily integrated into existing setups.

Overall, the Chauvet TFX-FS360 stands out as a powerful, multifunctional lighting fixture that brings versatility and creativity to any event. With its innovative technologies and user-friendly design, it is an excellent choice for lighting professionals and enthusiasts alike.
Top Page Image Contents