Troubleshooting and Maintenance

Note: Other than changing or cleaning the carbon brushes, all internal repairs should be done by a qualified service technician.

Problem

 

Cause

 

Action

Motor doesn’t rotate when switched

1.

Disrupted power

1.

Check Power Supply

on.

2.

Poor switch contact

2.

Repair switch

 

3.

Armature or field coil burnt

3.

Change coil

 

4.

Broken Stator Coil

4.

Replace Stator coil

 

5.

Worn carbon brushes

5.

Replace carbon brushes

Abnormal motor noise, rotates slowly,

Overload due to excessive drilling

Reduce drill depth or

does not rotate

depth or pressure

pressure/decrease force

Partial short circuit

Short circuit or open circuit armature

Repair or change armature

Low main voltage

Main power voltage too low

Adjust main power voltage

Overheated gearbox

1.

Overload, dull bit

1.

Reduce load, sharpen or

 

2.

Damp coils

 

replace bit

 

3.

Incorrect fitting

2.

Dry coils

 

4.

Decrease in voltage

3.

Repair/change armature

 

 

 

4.

Adjust voltage

Sparking

1.

Short circuit or break at armature

1.

Repair armature

 

2.

Surface of armature dirty or rough

2.

Clean armature

Note: Rotary Hammer must be unplugged before performing service and maintenance.

General maintenance:

1.Clean the work surface with a dry brush or clean cloth. Keep moving parts lightly greased. Always keep motor and vent areas free of dust and debris.

2.Grease the tool after 50 working hours, or more frequently with increased use.

3.Remove drill bits or chisels for storage.

Changing Carbon Brushes:

1.Using a screwdriver, remove the Brush Cap (70). See FIGURE 3 on page 5.

2.Be careful, the Brush Holder (68) may spring out. If it does not spring out easily, gently use the tip of the screwdriver to remove it. Examine the Brush (69); the surface should be smooth and clean. If scratch marks appear, or it is broken, replace immediately with an approved replacement brush from Harbor Freight Tools.

3.If the Brush (69) isn’t damaged, but only dirty, clean it off with a pencil eraser. Gently rub it until the dirt is removed. Remove the eraser dust from the Brush (69) when you are through cleaning it.

4.Gently reinstall the Brush (69) into the Brush Holder (68) and screw the Brush Cap (70) back on the unit and tighten.

SKU 47606

For technical questions, please call 1-800-444-3353.

Page

Page 7 Page 9
Page 8
Image 8
Chicago Electric 47606 Troubleshooting and Maintenance, Problem Cause Action, General maintenance, Changing Carbon Brushes
Page 7 Page 9

47606 specifications

The Chicago Electric 47606 is a versatile and powerful tool designed for both amateur and professional woodworkers. This table saw stands out for its combination of performance, ease of use, and portability. It is well-suited for various cutting tasks, including ripping large boards and making intricate crosscuts, making it a valuable addition to any workshop.

One of the primary features of the Chicago Electric 47606 is its robust 15-amp motor which delivers an impressive 5000 RPM. This powerful motor allows for smooth and efficient cutting, ensuring that users can tackle even the most demanding projects with ease. The saw has a large table surface that measures 27 inches by 16 inches, providing ample space for handling large workpieces. This table is constructed from durable materials, ensuring stability and reducing vibration during operation.

Safety is a top priority in the design of the Chicago Electric 47606. It includes a blade guard that protects users from accidental contact with the blade while allowing for clear visibility of the cutting area. Additionally, it features a push stick and a miter gauge for improved safety and precision, further enhancing the user experience.

The adjustable cutting height and angle of the blade are significant highlights of this table saw. Users can quickly adjust the blade height for various cutting depths, and the bevel adjustment allows for angled cuts up to 45 degrees. This versatility enables woodworkers to perform a wide range of cuts, from straightforward rip cuts to more complex miter cuts.

Furthermore, the Chicago Electric 47606 is designed for ease of transport. It includes a foldable stand, which not only provides stability during use but also makes storage and transportation convenient. Whether taking it to a job site or storing it in a garage, this feature enhances the portability of the saw.

Another impressive aspect of this table saw is its affordability. It offers a high level of performance and function at a competitive price point, making it accessible to hobbyists and professionals alike. Whether you are a weekend DIY enthusiast or a seasoned craftsman, the Chicago Electric 47606 combines performance, safety, and convenience, making it an excellent investment for woodworking projects of all types.
Top Page Image Contents