Page 3SKU 66439 For technical questions, please call 1-800-444-3353.
Do not touch the bulb at any time. 8. Use a soft cloth. Oil from skin may
damage bulb.
Do not operate the Light with a miss-9. ing or damaged housing (3), lens
(21), or grid (23). (See assembly
diagram.)
Risk of electric shock. Do not use 10. with extension cord near water or
where water may accumulate. Keep
lamp at least 16 feet (5m) from pools
and spas. Keep plugs and recep-
tacles dry. For use only on GFCI-
protected circuits. Suitable for wet
location use.
Maintain labels and nameplates on 11. the Light. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
Avoid unintentional starting. Prepare 12. to begin work before turning on the
Light.
Allow the unit to cool down before 13. changing bulbs or storing it.
This product is not intended for use 14. in a residence or to be mounted in a
cabinet. This product is not suitable
for recessed installation in ceilings or
on buildings. This product can cause
a re.
Do not let cord hang over edge of 15. table or counter, or touch hot sur-
faces.
Do not leave the Light unattended 16. when it is plugged into an electrical
outlet. Turn off the Light, and unplug
it from its electrical outlet before leav-
ing.
This product is not a toy. Keep it out 17. of reach of children.
People with pacemakers should 18. consult their physician(s) before use.
Electromagnetic elds in close prox-
imity to heart pacemaker could cause
pacemaker interference or pacemak-
er failure. In addition, people with
pacemakers should:
Avoid operating alone.•
Properly maintain and inspect to • avoid electrical shock.
Any power cord must be properly • grounded. Ground Fault Circuit
Interrupter (GFCI) should also be
implemented – it prevents sustained
electrical shock.
WARNING: Handling the cord on 19. this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling.
(California Health & Safety Code §
25249.5, et seq.)
The warnings, precautions, and in-20. structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.

General Safety Rules

Work area safety1.
Keep work area clean and well lit. a. Cluttered or dark areas invite acci-
dents.