Maintenance And
Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, Maintenance, and
Lubrication
soft brush and/or blowing clear with compressed air.
4.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wir- ing, and any other condition that may affect its safe operation.
2.After Use, wipe external surfaces of the tool with a clean cloth. Do not use any abrasive or
3.Regularly clean all ventilation open- ings by periodically brushing with a
SKU 67119 | For technical questions, please call | Page 16 |
