Assembly Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.

Note: Tile Saw sold separately.

1.Pull the Tile Saw’s Table to the front of the Frame. From under the right side of the Table, align the hole in the rail with the pin in the Table Lock Lever. Push the pin into the rail, locking the Table.

2.Align the holes on the Tile Saw’s Water Tray Frame with the holes on the Stand.

3.Insert Short Bolts through Washers and into holes. Tighten securely.

Water Tray Frame