| SPECIFICATIONS | ||
|
|
|
|
| Item | Description |
|
| Capability | 6 and 12 VDC battery tester with |
|
|
| charging system output |
|
| Load Test Capacity | 100 amps; 50~1000 cold cranking |
|
|
| amps |
|
| Display Meter | Analog, 0~16 VDC (maximum) |
|
| Test Cycle | 10 seconds per test with 1 minute cool |
|
|
| down; 3 tests in 5 minutes |
|
| Battery Cable / Clamps |
| |
| Overall Dimensions |
| |
| Features | Carrying handle and four rubber feet |
|
Save This Manual
You will need the manual for the safety warnings and precautions, operating and maintenance procedures. Keep your invoice with this manual in a safe and dry place for future reference.
SAFETY PRECAUTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instruc- tions listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.
4.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
5.Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.
6.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
SKU 90636 | For technicial questions, please call | Page 2 |
