Powering 120 Volt AC Tools And Equipment:

1.Prior to powering tools and equipment, make sure the Generator’s rated voltage, and amperage capacity (115 VAC / 20 Amps) is adequate to supply all electri- cal loads that the unit will power. If powering exceeds the Generator’s capacity, it may be necessary to group one or more of the tools and/or equipment for con- nection to a separate generator.

2.Once the Generator is running, simply connect the Power Cords of 115 volt AC powered tools and equipment into the 115 volt AC Duel Outlets (6).

(See Figure G.)

3.NOTE: The Generator features an AC Non-Fuse Circuit Breaker (5) to protect the AC circuit in case of an overload. Should an overload occur the Breaker will “trip” to its “OFF” position, causing the Generator to automatically shut down. In this case, refer to Step #1 above in this section. Then, reset the circuitry system by turning the Circuit Breaker to its “ON” position. Restart the Generator and con- tinue powering the remaining tools and equipment. (See Figure D.)

4.When finished using the Generator, turn the Engine Power Switch (2) to its “OFF” position. Turn the Fuel Valve (40B) to its “OFF” position. Then, disconnect all electrical powered tools and equipment from the Generator’s 115 volt AC Duel Outlets (6). (See Figures E, F, and G.)

5.After the Engine and Generator have completely cooled, store the Generator in a safe, clean, dry location (if not already installed in one).

Powering 12 Volt DC Tools And Equipment:

1.Prior to powering a tool or equipment, make sure the Generator’s rated voltage, and amperage capacity (12 VDC / 10 Amps) is adequate to supply all electrical loads that the unit will power. If powering exceeds the Generator’s capacity, it may be necessary to group one or more of the tools and/or equipment for con- nection to a separate generator.

2.Connect the Power Cord of a 12 VDC powered tool or equipment to the DC Ter- minals (7). NOTE: Make sure to connect the positive (+) lead of the Power Cord to the positive (+) Terminal on the Generator, and connect the negative (-)lead of the Power Cord to the negative (-)Terminal on the Generator.

(See Figure H, next page.)

3.If using only a 12 volt DC tool or equipment, turn the 120 volt AC Circuit Breaker

(5) to its “OFF” position. (See Figure D.)

4.Start and run the Engine as previously discussed in this manual.

SKU 92456

For technical questions, please call 1-800-444-3353.

Page 15

Page 14 Page 16
Page 15
Image 15
Chicago Electric 92456 operating instructions Powering 120 Volt AC Tools And Equipment, See Figure H, next
Page 14 Page 16

92456 specifications

The Chicago Electric 92456 is a versatile and powerful tool designed for a variety of woodworking projects, particularly known for its efficiency and user-friendly features. This compact router model is ideal for both professionals and hobbyists, providing an excellent balance of performance and affordability.

One of the standout features of the Chicago Electric 92456 is its robust 2.5 HP motor, which delivers ample power for demanding tasks. This motor supports variable speed settings, allowing users to adjust the RPM from 8,000 to 25,000. The ability to fine-tune the speed is essential for different applications, ensuring a clean and precise finish regardless of the material being routed.

The design of the Chicago Electric 92456 emphasizes ease of use and versatility. It comes with a soft-start feature that reduces the initial torque when the router is powered on, minimizing the chances of the tool jumping or causing uneven cuts. Additionally, the ergonomic handle design provides a comfortable grip, which helps to reduce fatigue during extended use, making it ideal for both amateurs and seasoned woodworkers.

This router is equipped with a dual LED work light, illuminating the work area to improve visibility and precision. This feature is particularly useful for detailed tasks or when working in environments with low lighting. The integrated dust collection port also plays a vital role in maintaining a clear workspace, enhancing both safety and cleanliness.

The Chicago Electric 92456 supports both 1/4-inch and 1/2-inch collets, enabling users to adapt the tool for various bits and applications. It also includes depth adjustment features for increased accuracy, ensuring that every cut meets the desired specifications.

In terms of construction, the router boasts a sturdy base that provides stability and balance during operation. This robust build is designed to withstand the rigors of frequent use, making it a reliable addition to any workshop.

Overall, the Chicago Electric 92456 is a well-rounded router that combines power, precision, and user-friendly features. Its adaptability and design make it an excellent choice for anyone looking to enhance their woodworking capabilities, whether for small home projects or larger professional endeavors.
Top Page Image Contents