y Safet
Specifications
Electrical Rating | 120 VAC, 60 Hz, 2 A |
|
No Load Speed | 12,000 Orbits Per Minute | E194601 |
Dust Chute | 11/4″ OD |
|
Sanding Pad Dimensions |
|
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
p Setu
Operation
ec
Maintenan
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Make sure that the Trigger is in the off‑position and unplug the tool from its electrical outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 11.
Assembly
Attaching the Dust Bag (29)
1. Connect the Dust Bag to the sander by firmly pushing | 2. The Dust Bag (29) will only work if the |
it into the dust port in the rear of the sander. | sandpaper has holes that line up with the |
| 8 dust collection holes in the Pad (22). |
Page 8 | For technical questions, please call | Item 94338 |
