Product Applications
1.When observing the safety rules, this Heat Gun is designed for all applications with hot air that are listed below:
•Shrinking of shrinkdown tubing, solder connectors and solder terminals, packaging and electrical components.
•Deforming of articles made from acrylic, PVC, and polystyrene tubing, plates, and profiles as well as most woods.
•Welding of thermoplastic polymer, flooring materials of PVC and linoleum, PVC- coated fabric, tarpaulins and foils.
•Soldering of tin, special silver solder, SMD elements, cable lugs, and for loosening soldered connections.
•Paint removal. Removal of old and even thick coatings of oil paint, varnish, and synthetic plaster.
•Drying of color shade samples, filter, adhesives, construction joints and stucco forms.
•Joining adhesives. Large surface gluing with contact adhesives, activation of pressure sensitive adhesives, acceleration of bonding processes, releasing of bonding points as well as releasing or bonding of edge bond or veneer.
•Defrosting of icy stairs and steps, door locks, trunk lids, car doors or water pipes, as well as for defrosting refrigerators and ice boxes.
•Disinfection. With the tool set at 1112° Fahrenheit, animal sites/stables may be disinfected. Woodworm infestation may be controlled (Caution: Danger of fire.
Do not heat up the wood surface excessively.)
Product Features
POWER SWITCH (3)
l LOW 0 OFF ll HIGH
BARREL COVER (8)
FIGURE A
SKU 96289 | For technical questions, please call | Page 11 |
